BMW ICOM A2 NEXT WiFi Connection method

1. Set the router to

User name: ISAP

Password: 12345678

2. Connect your computer to the router
3. The device is powered on and can be used after long WLAN light

If you want to set your device’s WIFI account password, please follow the following steps:

1. Connect the BMW ICOM to the car and connect the computer through the network cable
2. running “IToolRadar”

3. Record the current IP address

4. Open Internet explorer and enter the IP address just recorded (ip+ :58000)

5. Go to WLAN Settings

Enter account in SSID and password in pre-shared Key

6. Click Save Changes
7. Then restart the device and it can be used normally.